Xtreme Lip-Shaper® System Instant Natural Lip Enlargement Device by Thienna Ho

Home > Winners > #30172




DESIGN DETAILS
DESIGN NAME:
Xtreme Lip-Shaper® System

PRIMARY FUNCTION:
Instant Natural Lip Enlargement Device

INSPIRATION:
MY PERSONAL STORY OF HOW CANDYLIPZ XTREME LIP-SHAPER® SYSTEM WAS INVENTED. I was born with full lips. But shortly after I turned 35, my lips began to lose their youthful appearance. Gravity had forced my lips to shrink and flatten. My upper lip looked too long and the arches that outlined my upper lip, my Cupid’s Bow sagged and so did the corners of my mouth! I also showed less of my top teeth and more of my lower teeth when I talked. I was frustrated and unhappy. I was reminded of my aging lips on a daily basis. Every time I looked into a mirror, there they were. At first, I tried to correct my lip problems by using “tricks of the trade” to mask them. I used lip liners, lip glosses, and lipsticks to give me back that pouty lips look. But I was unsatisfied with the illusion I had created. It looked like as though I were trying much too hard. My four-year old niece tried to emulate me by using lipstick to draw a huge line way above her upper lip border and pointed proudly to her face. She shouted to everyone in the room, "This is Aunty Thienna!" I felt I had become a clown! In 2004, out of desperation I visited a plastic surgeon in Houston, Texas for a thread lip lift. It’s a noninvasive procedure in which fine threads are placed to gently pull from one nostril to the other and down to the arches of the upper lip to achieve the lip lift. After 45 minutes of in-take consultation, I left the office as fast as I could. I had seen the results of the thread lip lift. The doctor’s nurse had had the procedure done by the doctor himself. Her nostrils and the arches of her upper lip were asymmetrical! They looked stiff and unnatural. I was SAVED just in time! I would not be spending $5K to ruin my face. In 2006, the thin lip blues hit me again. I went to visit a plastic surgeon in San Francisco, where I live. He suggested a procedure called lip lift advancement. In it, a strip of skin is removed directly above the white roll- the border between the upper lip and the skin- to shorten the upper lip and restore the arches of the Cupid’s Bow. He said the risks of this procedure included scarring on the upper lip and the possibility of permanent stiffness of both lips. I dropped the idea immediately. In 2007, I tried temporary lip injections. The first time I had water injected into my lips. I am a very cautious person. So to see what I might look like if I used the injection process, I decided to try water injection first. If I didn’t like the results, at least I wouldn’t have to live with them for three to six months. The results? I looked like I had sausage lips! The procedure had been painful and it left my lips seriously bruised all over. But the sausage lips experience wasn’t quite enough to cure my curiosity about lip injections. I had my lips injected again twice in 2007. Anything to maintain my pout! Each time I had one and one-half syringes of Perlane Hyaluronic Acid injected into my lips at a cost of $800 a pop. The worst part of my lip injection experience was that my pouty lips did not last the three months I had been told to expect; they only lasted for about four weeks! This was turning out to be an expensive lesson with very unsatisfying results. It wasn’t worth the pain or the lumps I was developing in my lips. Not to mention the cost. I was through with injections! But I still had the problem of my aging lips. To solve it, I created a revolutionary breakthrough system based on a technology no doctor or plastic surgeon can match- and with results no one has been able to achieve for thousand of years of trying. I call it CandyLipz. INSPIRATION: How I Came Up With The Idea: I have to thank my grandfather for this. While I was growing up in Vietnam, I often saw my grandfather using cupping therapy to improve circulation in his body. Chinese cupping therapy is an ancient therapy dating back to 3500 years ago. Cupping therapy is a method of using glass cups with fire to generate a local suction on the skin to help release trapped toxins from deep tissues and to help improve cell’s oxygen movements. It also improves nutrient uptake. I remembered that where the glass cups were applied to my grandfather’s back, the skin raised to a half round dome, which resembled half of a tomato. Using this same concept, I was able to invent the Xtreme Lip-Shaper® System. Although the concept was very simple, the structural design of the mouthpieces and the pressure of the pumps were very challenging and tricky. It took me nearly three years to meticulously test the design 101 ways to ensure it works beautifully. How I discovered the Double-Lobed Lips Invention? When I was a 7 or 8 years old, I loved to play with rubber bands. I would wear a load of them around my wrist. My mom always scolded me and asked me to remove them because she said they cut off my wrist circulation. After I took them off, I always saw these indented circular rings around my wrist. At the time, I was inventing Xtreme Lip-Shaper® System, I thought maybe the lips might work the same way and they did! That was a Eureka moment for me! Thank you mom! (I must thank my dad too as my dad worked as a goldsmith since he was 7 years old. He has tools around the house so I have been inventing since I was 15 years old.)

UNIQUE PROPERTIES / PROJECT DESCRIPTION:
Xtreme Lip-Shaper® System is the world's first home-use hand-operated suction device coupled with advanced lip-shaper technology to produce instant lip enlargement results. This system is 100% natural and it has been clinically proven safe for intended use. It takes just under 2 minutes to enhance your lips and the look lasts for 2 hours. This device has been engineered to perfection to shape and contour your lips in ways not even surgeons can. The benefits of this breakthrough invention are astounding! 1. It creates the appearance of breathtaking, single-lobed lower lip or a double-lobed lower lip just like Angelina Jolie. 2. It can enhance the upper or lower lip separately. 3. The design is built to raise the arches of the Cupid’s bow, shorten the distance between the nose and upper lip, create pouty look on the area above the lip, fill in grooves and lip pits, lift the corners of the mouth, and block the development of duck lips. The features of this invention are also unique. 1. The device is used hands-free so multi-tasking is a breeze. 2. Both males and females can use the device.

OPERATION / FLOW / INTERACTION:
The lip enhancement device uses a 3,500-year-old Chinese 'cupping' method – in other words, suction method – coupled with an advanced lip-shaper technology to shape, contour, and enhance the appearance of the lips instantly. It is a one of a kind product. If you use just a suction device tube or bulb without the lip-shaper technology, the results are not the same. Up until today, scientists have established that surgeons cannot correct the aging of lips. To create or restore the full pouty lip look, both the lips and the area above them need to be enhanced. As you age, the area between the nose and the upper lip lengthens, flattens and becomes less full. The dimple and raised vertical columns of skin above the upper lip - known as the philtrum - protrude less and lose their definition. If you enhance just the lips using lip injection methods or other methods that target the lips alone, you may look like you have stiff "trout" or "blown up" lips. To authentically rejuvenate the lips, the area above the upper lip must also be enhanced - it's this that gives you the pouty look you desire. Lip surgery and injections also carry many risks include scarring, infections, asymmetrical issues, nerve damage, implant migration, and lip nodules. According to RealSelf survey, 80 percent of people who used these methods were very unsatisfied with the results. Many people came out having stiff sausage lips. In summary, my invention have eliminated all these issues. Xtreme Lip-Shaper System can astoundingly reshape the lips instantly. The design has been engineered to create the natural pouty lip look. Thus, any slight technical changes in the lip shaper mouthpiece technology, users will get pointy duck lips and lumpy lips. This means, buyers must beware of buying a knock-off product.

PROJECT DURATION AND LOCATION:
3 years. San Francisco, California. USA.

PRODUCTION / REALIZATION TECHNOLOGY:
The device is 100% food-grade silicone, hypo-allergenic, and environmental friendly.

SPECIFICATIONS / TECHNICAL PROPERTIES:
The device is 76.2 mm W x 76.2 mm D x 76.2 mm H.

TAGS:
Xtreme Lip Shaper System, Lip Plumper, Natural Lip Enhancement, Lip Injections, Collagen Injections, Thienna, CandyLipz, Award Winning Lip Plumper, Lip Plumper Gloss

RESEARCH ABSTRACT:
The objective of this project is to find a natural way to enlarge and correct the aging lips. Believe it or not, the upper and lower lips develop and reach their maximum fullness at different times. The female upper lip fully develops at the age of 14 and stays full until the age of 16. After that, the upper lip gradually starts to thin out. The female lower lip reaches maximum fullness a little later – at the age of 18 – and it starts to thin out after that. For males, both lips reach maximum fullness at the age of 16 and then start to thin out. Scientists have established that surgeons cannot correct the aging of lips. To create or restore the pouty look, both the lips and the area above them need to be enhanced. As you age, the area between the nose the upper lip lengthens, flattens, and becomes less full. The dimple and raised vertical columns of skin above the upper lip – known as the philtrum – protrude less and lose their definition. Unfortunately, current surgical and injection methods do not make the lips look completely natural. Surgeons can shorten the distance between the upper lip and the nose using methods such as the sub-nasal skin excision and the vermillion advancement technique, but both leave a visible scar. If you enhance just the lips using lip injection methods or other methods that target the lips alone, you may look like you have stiff “trout” or “blown up” lips. To authentically rejuvenate the lips, the area above the upper lip must also be enhanced – it’s this that gives you the pouty look you desire. Current methods such as lip surgery and lip injections also carry risks including scarring, implant migration, lip nodules, nerve damage, and lip asymmetry. In addition, these methods are expensive, as a result, many people are unable to afford them. For examples, lip surgery can cost between $5000 to $8000 and lip injections from $400 to $800 a session where patients must return at least twice a year to maintain their pouty lips. The results from my experiment showed that by using my 100% natural suction method coupled with advanced lip shaper technology, all 100 users were able to enhance, shape, and contour their lips in 2 minutes and the look lasts for 2 hours.

CHALLENGE:
There are many challenges for my project. 1) It was very difficult to manufacture the inner mouthpiece without getting mold lines. If you have mold lines in the internal structure, you will get the lines on your lips. 2. To be able to raised the arches of the upper lip, the upper chamber of the mouthpiece has a gradual raised bulge of 6.35 mm. This bulge was impossible to produce as told by many engineers. However, I was able to do the impossible by splicing the mouthpiece in a particular way and put it back without creating mold lines in the internal structure of the mouthpiece. 3. The center of the mouthpiece has a horizontal platform to divide the upper and lower chamber of the mouthpiece. This platform has a 3.18 mm slit. The purpose of this slit is to reduce suction to the top chamber of the mouthpiece. Too much suction on the upper chamber will cause the upper lip to develop too quick. Thus, the result will be a duck pointy upper lip and a lumpy one. However, with very skillful manufacturing methods of splicing the mouthpiece and how each part was put together without the mold lines, I was able produce the results I desire. 4) It was very difficult to find the right pump's durometer for the lips. If the pump's material is too soft and has a lower bounce back effect, the pump will not work at all. In conclusion, from diligent testing and finding the right manufacturing practices, I was able to resolve all my issues.

ADDED DATE:
2013-09-18 18:11:14

TEAM MEMBERS (1) :


IMAGE CREDITS:
Thienna Ho, 2013.

Visit the following page to learn more: http://www.CandyLipz.com


CLIENT/STUDIO/BRAND DETAILS
NAME:
CANDYLIPZ LLC.

PROFILE:
CandyLipz LLC is the manufacturer of the innovative Xtreme Lip-Shaper® System developed by award-winning inventor Dr. Thienna Ho. The Xtreme Lip-Shaper System features an easy-to-use, hand-operated suction pump and advanced lip-shaping technology, allowing users to enhance the appearance, shape, and contour of their lips naturally – without the side effects of plastic surgery, injections, drugs, or chemicals. CandyLipz lets users plump and shape their upper and lower lips together or separately, and create a single-lobed or double-lobed effect. The Xtreme Lip-Shaper System is small, attractive, and portable, so it can be used anytime and anywhere. Users can control the desired effect, from subtle enhancement to double or even triple their current lip size; and a two-minute session produces results that last for up to two hours. You can now shape and contour the appearance of your lips the way you want. Naturally.



NOMINATION DETAILS

Xtreme Lip-Shaper® System Instant Natural Lip Enlargement Device by Thienna Ho is a Nominee in Beauty, Personal Care and Cosmetic Products Design Category.

· This project is currently confidential as results have not been announced yet. Images and further details of the project is not available for public yet, please check back later. If you are the owner of this design, please login to view the images.

· Click here to register today inorder to be able to view the profile and other works by Thienna Ho when results are announced.


AWARD DETAILS

Xtreme Lip-Shaper® System Instant Natural Lip Enlargement Device by Thienna Ho is Winner in Beauty, Personal Care and Cosmetic Products Design Category, 2013 - 2014.



· Press Members: Login or Register to request an exclusive interview with Thienna Ho.

· Click here to register inorder to view the profile and other works by Thienna Ho.


SOCIAL
+ Add to Likes / Favorites | Send to My Email | Submit Comment | Comment | Testimonials | View Press-Release | Press Kit | Translations



Did you like Thienna Ho's Cosmetic Product Design?
You will most likely enjoy other award winning cosmetic product design as well.
Click here to view more Award Winning Cosmetic Product Design.


Did you like Xtreme Lip-Shaper® System Instant Natural Lip Enlargement Device? Help us create a global awareness for good cosmetic product design worldwide. Show your support for Thienna Ho, the creator of great cosmetic product design by gifting them a nomination ticket so that we could promote more of their great cosmetic product design works.

See other A' Design Award and Competition WinnersA' Design Award Presentation Submit Your Designs
 
design award logo

BENEFITS
THE DESIGN PRIZE
WINNERS SERVICES
PR CAMPAIGN
PRESS RELEASE
MEDIA CAMPAIGNS
AWARD TROPHY
AWARD CERTIFICATE
AWARD WINNER LOGO
PRIME DESIGN MARK
BUY & SELL DESIGN
DESIGN BUSINESS NETWORK
AWARD SUPPLEMENT

METHODOLOGY
DESIGN AWARD JURY
PRELIMINARY SCORE
VOTING SYSTEM
EVALUATION CRITERIA
METHODOLOGY
BENEFITS FOR WINNERS
PRIVACY POLICY
ELIGIBILITY
FEEDBACK
WINNERS' MANUAL
PROOF OF CREATION
WINNER KIT CONTENTS
FAIR JUDGING
AWARD YEARBOOK
AWARD GALA NIGHT
AWARD EXHIBITION

MAKING AN ENTRY
ENTRY INSTRUCTIONS
REGISTRATION
ALL CATEGORIES

FEES & DATES
FURTHER FEES POLICY
MAKING A PAYMENT
PAYMENT METHODS
DATES & FEES

TRENDS & REPORTS
DESIGN TRENDS
DESIGNER REPORTS
DESIGNER PROFILES
DESIGN INTERVIEWS

ABOUT
THE AWARD
AWARD IN NUMBERS
HOMEPAGE
AWARD WINNING DESIGNS
DESIGNER OF THE YEAR
MUSEUM OF DESIGN
PRIME CLUBS
SITEMAP
RESOURCE

RANKINGS
DESIGNER RANKINGS
WORLD DESIGN RANKINGS
DESIGN CLASSIFICATIONS
POPULAR DESIGNERS

CORPORATE
GET INVOLVED
SPONSOR AN AWARD
BENEFITS FOR SPONSORS
IMPRESSUM IMPRINT

PRESS
DOWNLOADS
PRESS-KITS
PRESS PORTAL
LIST OF WINNERS
PUBLICATIONS
RANKINGS
CALL FOR ENTRIES
RESULTS ANNOUNCEMENT

CONTACT US
CONTACT US
GET SUPPORT

Good design deserves great recognition.
A' Design Award & Competition.